Menu

Dagens TILBUD

Ring vedr TILBUD
329 729 00
Vi har mange - rigtig mange lige nu!

SERVICE / REPARATION

Trænger dit gear til service eller reparation ?? PSS har eget værksted, hvor vi leverer hurtig og effektiv service til overkommelige priser! Kontakt værkstedet her!

Nyheder og Tilbud

Kunne du tænke dig
at modtage nyheder
og tilbud fra PSS
på email ?
Så meld dig til her 

Mød PSS på Facebook

Facebook

Like PSS eller skriv dine kommentarer på Facebook

DPA 4060-BM

DPA 4060-BM Omnidirectional, Hi-Sens
Because of their small size, these tiny condensers exhibit an exceedingly accurate omnidirectional pattern
and therefore do not need to be aimed directly at the sound source to achieve quality pickup.

The 4060 is available in four colors: black, brown, beige and white.

Applications
Excellent speech and vocal mics, DPA miniatures are de facto theatre standards. Musicians and engineers use them
as live or studio microphones for close-miking acoustic string instruments like violin, guitar, bass, viola and harp.
On television, DPA’s small condenser microphones are popular as lavalier lapel and tie clip mics.

Accessories
Two grids are supplied (one high boost and one soft boost) and by changing these grids
you can acoustically modify the microphone’s response according to their placement on the body –
the chest, the head etc. Additionally, a wide range of accessories is available, such as
windscreens in different colors, clips and holders, extension cables, and power supplies

Wireless microphones
A wide range of connection adapters makes it possible to use DPA miniature microphones
with all professional UHF, VHF or digital wireless system available plus 48 V Phantom.
DPA has specific adapters for AKG, Audio Ltd., Audio-Technica, Beyerdynamic, Electro-Voice,
Lectrosonics, Micron, Mipro, Pastega, Telex ProStar, Ramsa, Samson, Sennheiser, Shure, Sony,
Toa, Vega and other systems. Each adapter for your cordless microphone is guaranteed
to perfectly mate to your system of choice.

Related microphones
The DPA 4061, 4062 and 4063 are acoustically identical to the 4060 but have been adjusted to handle
higher SPL and to match some of the more sensitive transmitters on the market.
The 4060 is also included in stereo and instrument microphone kit solutions.

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz.
Sensitivity, nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A)
Total harmonic distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
Dynamic range: Typ. 100 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: 30 – 40 ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector: MicroDot
Color: Black, beige, brown or white
Microphone weight: 7.5 g (0.26 oz) incl. cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Microphone length: 12.7 mm (0.5 in)
Cable length: 1.8 m (5.9 ft)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up t 90%
Gå til butik