Menu

Dagens TILBUD

Ring vedr TILBUD
329 729 00
Vi har mange - rigtig mange lige nu!

SERVICE / REPARATION

Trænger dit gear til service eller reparation ?? PSS har eget værksted, hvor vi leverer hurtig og effektiv service til overkommelige priser! Kontakt værkstedet her!

Nyheder og Tilbud

Kunne du tænke dig
at modtage nyheder
og tilbud fra PSS
på email ?
Så meld dig til her 

Mød PSS på Facebook

Facebook

Like PSS eller skriv dine kommentarer på Facebook

PSC DV ProMix 1

DV ProMix 1 also incorporates a bright sunlight readable LED peak meter, a transformer balanced line driver and switchable limiters on both the pre-amp and the line driver amplifiers. In addition, the DV ProMix 1 features a monitor return amplifier with a balanced XLR input and continuously variable gain for flexibility. Headphone monitoring can be selected from Direct to both ears, Monitor to both ears, or a combination of the two.
The DV ProMix 1 will also except an optional Boom Pole Remote slide fader like our AlphaMix for easy operation while booming. Power is provided by two, 9 volt batteries or external 7-16Vdc. A belt clip is provided.
The PSC DV ProMix 1 can be used for Boom operators feeding DV cams or other types of recorders, or for use as microphone to line amp or as a standalone limiter, or for radio remotes or as a mic power supply and pre-amp or in a host of other ways.

  • Monitor Return Gain (continuously variable, push pot)
  • Pre-amp Gain (continuously variable, push pot)
  • Headphone Volume (continuously variable, push pot)
  • Power Switch, internal, off, external, two color LED indicates low battery
  • Low Cut Filters, 80Hz, 20Hz (flat), 150Hz
  • Limiters, Pre-amp and Line Driver Amp, on, off, 2 LED’s indicate limit action
  • Headphone Selection, D (direct), M (monitor return), D/M split ears
  • RC (remote control) LED indicates when Boom remote is being used
  • Fader, smooth ergonomic fader knob
  • Output Meter, super bright multi color LED’s, Peak reading
  • Headphone Jack, 1/4″ stereo
  • Boom Remote Connector, TA5M, for use with option boom remote slide fade
  • Balanced Monitor Input, XLR-3 Female, excepts signals from -50dBv to +10dBv
  • Balance Microphone Input, excepts signals from -65dBv to -5dBv
  • 12T/48PH Switch, selects 12T, DYN or 48PH microphone power
  • Mic/Line Switch, Selects output level, 0dBv, -10dBv, -40dBv
  • Output Connector, transformer balanced, XLR-3-Male
  • External Power, will operate from 7 to 16Vdc
Gå til butik