Dagens TILBUD

Ring vedr TILBUD
329 729 00
Vi har mange - rigtig mange lige nu!

SERVICE / REPARATION

Trænger dit gear til service eller reparation ?? PSS har eget værksted, hvor vi leverer hurtig og effektiv service til overkommelige priser! Kontakt værkstedet her!

Nyheder og Tilbud

Kunne du tænke dig
at modtage nyheder
og tilbud fra PSS
på email ?
Så meld dig til her 

Mød PSS på Facebook

Facebook
Like PSS eller skriv dine kommentarer på Facebook

Sanken CS-3e

CS-3e Location and studio shotgun featuring exceptional off-axis rejection
Unique design combination of line mic array and second pressure gradient method
Very sharp pinpoint directivity
Provides rich human voice characteristics

CS-3e stands out among shotgun microphones because it maintains directivity over an extremely wide frequency range, especially in the low frequencies. Because of its unique design, the CS-3e is an excellent choice for use in difficult applications, such as close-to-ceiling positions or locations near a noisy camera. Even in such challenging situations, the excellent side and rear rejection of the CS-3e helps to capture only the targeted dialogue without ambient reverberation problems. The CS-3e delivers sharp directional sound even in the lower frequencies. Sanken’s original design results in a low proximity effect which facilitates working in a scene close-up and wide, while producing little change in sound character.
In the CS-3e, three directional capsules are arranged in a front-back array to combine line microphone performance and second-order pressure gradient response in a single system. With this unique design, the CS-3e achieves phenomenal supercardioid directivity in the lowest frequencies and throughout the full range in a microphone only 27cm (10 inches) in length. It is significant that the CS-3e picks up the targeted frontal sound sources with exceptional clarity over a wide frequency range – even in noisy ambient environments or in long reverberation spaces – by rejecting undesired noise and sounds coming from the rear and sides.

Directivity   Super Cardioid / lobar 
Transducer  DC biased condenser 
Frequency range    50Hz – 20kHz 
Sensitivity (nominal at 1kHz)    40mV/Pa (-28dB,0dB=1V/Pa) 
Equivalent noise level (A-weighted)     15dB-A 
Max SPL (1% THD)          120dB SPL 
Output impedance at 1KHz      120 ohms 
Powering       +48±4V phantom 
Current consumption     less than 2.5mA 
Weight  120g 
Dimensions 270mm X 19mm (diameter) 
Surface finish matte black 
Connector XLR-3M